Eden Innovations Broadens EdenCrete®Pz7 Installations with Amrize Across Texas, Minnesota, and Greater Toronto

Strategic Expansion of EdenCrete®Pz7 into Texas and Minnesota Markets

Eden Innovations has achieved a significant milestone by introducing its EdenCrete®Pz7 product into two new U.S. states through its collaboration with Amrize. In Texas, Eden will install bulk storage tanks and automated dispensing equipment at a dual-plant site—two Amrize concrete plants operating consecutively—marking Eden's first installations in the state. This Texas expansion targets a high-growth North American region with substantial concrete demand and robust Amrize operations.

Concurrently, Eden US is extending its footprint into Minnesota by installing EdenCrete®Pz7 dispensing equipment at another Amrize concrete plant. These state expansions underscore EdenCrete®Pz7’s proven benefits in enhancing concrete strength from existing mix designs, enabling cost savings and CO2 footprint reductions through cement reduction and mix optimization—key sustainability goals in construction materials.

Enhancing Canadian Market Presence with Greater Toronto Expansion

Alongside U.S. growth, Eden is strengthening its Canadian market position by expanding EdenCrete®Pz7 installations in the greater Toronto area from one to two plants. This development reflects increasing demand for EdenCrete®Pz7-infused concrete mixes among Amrize customers and end-users. Toronto is a vital market for ready-mix concrete in Canada, and this expansion highlights Eden’s growing adoption among major industrial clients in the region.

Eden plans to collaborate with newly equipped plants to broaden EdenCrete®Pz7 usage across diverse mix designs. This partnership approach aims to support ready-mix plants and their customers in leveraging the carbon nanotube-enhanced benefits of their concrete, signaling a shift from simple equipment installation to comprehensive mix design optimization and performance validation.

Product Orders Accompany Installations, Indicating Commercial Confidence

Each of the four new plant installations—two in Texas, one in Minnesota, and one in greater Toronto—is paired with EdenCrete®Pz7 starter product orders totaling approximately US$32,000 (about AUD$45,750). These initial volumes lay the groundwork for anticipated recurring revenue as Amrize integrates EdenCrete®Pz7 into standard concrete mixes across various applications.

The simultaneous product and equipment orders demonstrate Amrize’s commitment beyond trial phases, reflecting confidence based on positive local trial results and a strengthening relationship with Eden. This progression validates Eden’s technology in real-world ready-mix concrete production environments.

Amrize: A Leading North American Building Materials Company

Amrize, a prominent North American building solutions company, was spun off from Switzerland’s Holcim Group and listed separately on the New York Stock Exchange and SIX Swiss Exchange (NYSE/SIX: AMRZ) in June 2025. Operating over 1,000 sites with approximately 19,000 employees across the U.S. and Canada, Amrize ranks among the largest suppliers of cement, aggregates, ready-mix concrete, and building materials in North America. This scale offers Eden substantial opportunities for volume growth and geographic expansion.

Since the June 2025 spin-off, Amrize has continued and expanded EdenCrete®Pz7 installations and trials initiated under Holcim US. With several ready-mix plants in Colorado already equipped or using EdenCrete®Pz7, Amrize has now requested expansions into Texas and Minnesota, alongside growth in Ontario, Canada. This expansion from established regions into new markets highlights Amrize’s confidence in EdenCrete®Pz7’s performance and commercial potential.

EdenCrete®Pz7: Advanced Nano-Carbon Concrete Additive Technology

EdenCrete®Pz7 is one of Eden’s three proprietary nano-carbon-strengthened concrete additives designed to enhance multiple concrete performance attributes. It improves compressive, flexural, and tensile strength, abrasion resistance, reduces permeability and shrinkage, and increases modulus of elasticity. These improvements yield stronger, tougher, more durable concrete with extended service life and reduced life-cycle carbon footprint.

Commonly used in concrete mixes with higher pozzolan content—such as fly ash and blast furnace slag, which are zero greenhouse gas footprint by-products—EdenCrete®Pz7 enables significant Portland cement replacement without compromising performance. This results in cost-effective concrete mixes with lower environmental impact.

Proven Market Applications and Track Record Since 2015

Since 2015, EdenCrete® products have been marketed in the U.S. and other countries, consistently delivering benefits across a broad range of applications including low- to high-rise buildings, infrastructure projects like roads, bridges, airports, ports, and marine structures, as well as bus stations, carparks, water pipes, hardstand areas, waste transfer stations, warehouses, shotcrete, stadiums, and pre-stressed and pre-cast concrete products. This extensive portfolio underscores EdenCrete® technology’s versatility and market acceptance.

The long-term operational history validates product reliability in real-world construction settings. Adoption across diverse applications and geographies supports Eden’s commercial expansion, with the Amrize partnership leveraging this established success amid rising demand for sustainable, performance-enhancing concrete additives.

Geographic Diversification and Recurring Revenue Growth Strategy

Expanding EdenCrete®Pz7 installations to new plants in Texas and Minnesota, alongside growth in Toronto, marks a key step in Eden’s strategy to broaden its footprint with Amrize, one of North America’s largest cement and concrete suppliers. These additions significantly extend Eden’s geographic reach beyond existing Colorado installations, targeting high-growth regions with substantial concrete volumes and strong Amrize presence.

The model combining automated dispensing equipment installations with ongoing product supply orders fosters recurring revenue streams rather than one-off sales. As new plants come online and Eden collaborates to expand product use across mix designs, the company is positioned to benefit from volume growth, customer retention, and multiple revenue points within Amrize’s extensive operations.

Driving Sustainability and Cost Efficiency in the Concrete Industry

Amrize’s expanding adoption of EdenCrete®Pz7 aligns with industry-wide efforts to reduce carbon emissions from cement production, a major contributor to global greenhouse gases. By enabling cement reduction while maintaining or improving concrete performance, EdenCrete®Pz7 addresses critical sustainability challenges faced by producers and customers. Its ability to lower CO2 footprints through pozzolan substitution places it at the nexus of environmental responsibility and operational cost savings.

With increasing regulatory demands, evolving building codes, and customer preference for low-carbon solutions, Amrize’s commitment to EdenCrete®Pz7 installations signals recognition of the product as a strategic asset for sustainability targets and cost management. It offers the dual advantage of stronger, more durable concrete with reduced environmental impact, delivering a compelling value proposition in today’s sustainability-focused market.

Implementation Timeline and Future Collaboration Plans

In the coming months, Eden plans to work closely with new plant sites to expand EdenCrete®Pz7 usage across a wide range of mix designs. This collaborative approach acknowledges that successful adoption requires cooperation with plant operators, quality teams, and end-users to optimize mixes and validate performance across various applications and specifications. The phased implementation allows thorough installation, testing, and integration at each location.

By positioning itself as a technical partner rather than just a supplier, Eden aims to deepen integration of EdenCrete®Pz7 into Amrize’s standard mix portfolios, potentially increasing per-plant volume consumption and expanding the addressable market. This partnership also facilitates market feedback, product refinement, and case studies to support broader adoption.