GD Energy Products' 2500Q HDF pumps surpass 10,000 pumping hours and counting

September 10, 2024 04:00 AM AEST | By EIN Presswire
 GD Energy Products' 2500Q HDF pumps surpass 10,000 pumping hours and counting
Image source: EIN Presswire
HOUSTON, TX, UNITED STATES, September 9, 2024 /EINPresswire.com/ -- GD Energy Products (GDEP), the leading total solutions provider for the frac, drilling, and well servicing pumps market, has announced twenty-two of its 2500Q HDF quintuplex pumps have all exceeded 10,000 pumping hours and continue to operate without any major repairs. This remarkable achievement underscores the HDF’s exceptional durability and reliability in some of the most challenging hydraulic fracturing environments in the industry.

GDEP’s enhanced power end frame on the HDF model has been rigorously validated and proven in demanding regions such as the Haynesville, Marcellus/Utica, and Permian Basins, where operating pressures range from 8,000 PSI to 12,500 PSI. Despite the harsh operating conditions, GDEP’s 2500Q HDF pumps have outperformed industry standards, achieving performance life of over 43 percent greater than the average.

Turner Hall, engineering director, GDEP, said, “Most 2500 horsepower pumps in the industry last about 7,000 hours before needing a major repair. Our 2500Q HDF pumps reaching over 10,000 service hours without significant maintenance is a remarkable achievement. It highlights the durability and reliability of our product, proving that GDEP continues to lead the industry in providing solutions that exceed customer expectations."

Through innovative and long-term customer partnerships, GDEP has remained steadfast in dedication to solving critical challenges its customers face. GDEP’s team of engineers worked in close collaboration with a valued customer in response to the widespread industry challenge of premature power end frame cracks.

The project addressed frame cracking, which causes significant production downtime and increased maintenance costs. GDEP’s solution involved reengineering the frame with thicker steel construction to reduce operational stresses at critical joints and redesigning the internal main bearing retention system to eliminate bending or breaking of the snap ring bearing retainer. These enhancements not only improved frame durability, but also optimized gear and pump timing, offering a solution to a long-standing industry problem.

Hall said, “These upgrades have significantly reduced unplanned power end replacements for our customer, cutting costs per pumping hour and decreasing downtime and maintenance expenses. This has improved total cost of ownership and increased monthly pumping hours, reducing the need for standby pumps.”

Beyond new pumps, GDEP’s Reframe Program offers cost-saving solutions by extending the life of existing subcomponents and repurposing them into the HDF frame, allowing customers to reduce costs while maintaining high performance in the field.

Hall added, “With the reframed HDF power end, customers can extend the life of their pump and achieve longer hours without having to invest in new equipment. This reframe repair solution enables customers to save 30 percent while simultaneously decreasing operational downtime by upgrading their unit to the most durable frame on the market.”

GD Energy Products’ 2500Q HDF pumps demonstrate their commitment to innovation and delivering superior, industry-leading equipment. By prioritizing the needs of their customers and serving them to the best of their ability, GDEP ensures that service companies can pump longer and drive the industry forward, fulfilling their mission to keep customers up and running every day.
##

About GD Energy Products
Since 1859, GD Energy Products has been designing and perfecting pumps for the global oil and gas industry. Our state-of-the-art repair shops and service facilities in every major North American shale play as well as strategic international locations contribute to making GD Energy Products the only total solutions provider to the frac, drilling, and well servicing market. We serve as a partner to customers for every aspect of aftermarket support – including high performance consumables, field service, repair and exchange programs, training, technical support and partnership supply agreements. To find out more, visit: www.GDEnergyProducts.com.

Anna Scordos-Brooke
Foster Marketing
[email protected]

Legal Disclaimer:

EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.


Disclaimer

The content, including but not limited to any articles, news, quotes, information, data, text, reports, ratings, opinions, images, photos, graphics, graphs, charts, animations and video (Content) is a service of Kalkine Media Pty Ltd (“Kalkine Media, we or us”), ACN 629 651 672 and is available for personal and non-commercial use only. The principal purpose of the Content is to educate and inform. The Content does not contain or imply any recommendation or opinion intended to influence your financial decisions and must not be relied upon by you as such. Some of the Content on this website may be sponsored/non-sponsored, as applicable, but is NOT a solicitation or recommendation to buy, sell or hold the stocks of the company(s) or engage in any investment activity under discussion. Kalkine Media is neither licensed nor qualified to provide investment advice through this platform. Users should make their own enquiries about any investments and Kalkine Media strongly suggests the users to seek advice from a financial adviser, stockbroker or other professional (including taxation and legal advice), as necessary.
The content published on Kalkine Media also includes feeds sourced from third-party providers. Kalkine does not assert any ownership rights over the content provided by these third-party sources. The inclusion of such feeds on the Website is for informational purposes only. Kalkine does not guarantee the accuracy, completeness, or reliability of the content obtained from third-party feeds. Furthermore, Kalkine Media shall not be held liable for any errors, omissions, or inaccuracies in the content obtained from third-party feeds, nor for any damages or losses arising from the use of such content.
Kalkine Media hereby disclaims any and all the liabilities to any user for any direct, indirect, implied, punitive, special, incidental or other consequential damages arising from any use of the Content on this website, which is provided without warranties. The views expressed in the Content by the guests, if any, are their own and do not necessarily represent the views or opinions of Kalkine Media. Some of the images/music that may be used on this website are copyrighted to their respective owner(s). Kalkine Media does not claim ownership of any of the pictures displayed/music used on this website unless stated otherwise. The images/music that may be used on this website are taken from various sources on the internet, including paid subscriptions or are believed to be in public domain. We have made reasonable efforts to accredit the source wherever it was indicated as or found to be necessary.
This disclaimer is subject to change without notice. Users are advised to review this disclaimer periodically for any updates or modifications.


AU_advertise

Advertise your brand on Kalkine Media

Sponsored Articles


Investing Ideas

Previous Next
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.