Classic Minerals Announces Encouraging Results From RC Drilling At Kat Gap Project

Classic Minerals Announces Encouraging Results From RC Drilling at Kat Gap Project

Based in Landsdale in Australia, Classic Minerals Limited (ASX: CLZ) is a metals & mining sector play, with focus on gold exploration and development in the Goldfields region. The company holds tenements covering a total area of 178 square kilometres across three major exploration regions in Western Australia, with the areas identified to hold high grade gold, copper, nickel, cobalt, manganese, and base metal targets.

Assays Results from RC Drilling Program

On 4 September 2019, CLZ updated the market with assays results received from the latest reverse circulation (RC) drilling program at the company’s flagship project, Forrestania Gold Project (FGP) in Western Australia. As of now, under the program, the company has drilled a total of 17 holes to a depth of 1,880 metres at the Kat Gap project, which is strategically located ~ 70 kilometres south-south east of FGP. The 17-hole drilling was targeted to enhance/boost known high-grade gold mineralisation.

FGP Tenure Shown in Red (Source: Company’s Report)

Of the total 17 holes, 12 holes (from FKGRC090 to FKGRC098 and FKGRC104 to FKGRC106) were drilled along the granite-greenstone contact, owing to which the down-dip projection, adjacent to the Proterozoic dyke, extended to more than 100 metres vertical below the surface with mineralisation open in all directions.

The 12 holes (drilled to a total depth of 1,360 metres) were drilled in order to test the up-dip and down-dip estimations of the primary granite-greenstone contact lode in the vicinity of the cross-cutting Proterozoic dyke and the down-dip extent of the northern extension zone. The current round of reserve circulation drilling was majorly aimed at testing the down-dip extent of earlier intercepts of high grade where the contact flattened. Moreover, the program was designed to perform testing on the down-dip estimates of recent high-grade intercepts in the newly extended northern zone.

The company reported the following better results from these 12 holes:

  • A drill hole, FKGRC090, intersected 13 metre at the rate of 4.91 gram per tonne gold from 33 metre, which included 1 metre at the rate of 22.10 gram per tonne gold from 36 metre.
  • Another drill hole FKGRC091 intersected 8 metre at the rate of 5.86 gram per tonne gold from 37 metre, which included 1 metre at the rate of 9.90 gram per tonne gold from 41 metre.
  • The FKGRC092 drill hole intersected 8 metre at the rate of 8.26 gram per tonne gold from 58 metre, which included 2 metre at the rate of 21.80 gram per tonne gold from 61 metre.
  • The drill hole identified as FKGRC093 intersected 3 metre at the rate of 7.44 gram per tonne gold from 92 metre, which included 1 metre at the rate of 17.40 gram per tonne gold from 93 metre.
  • The FKGRC094 drill hole intersected 8 metre at the rate of 4.19 gram per tonne gold from 109 metre, which included 1 metre at the rate of 13.50 gram per tonne gold from 115 metre.
  • The drill hole identified as FKGRC095 intersected 9 metre at the rate of 20.94 gram per tonne gold from 123 metre, which included 1 metre at the rate of 125.00 gram per tonne gold from 126 metre.

Drill Highlights (Source: Company’s Report)

The remaining five holes from FKGRC099 to FKGRC103 were drilled out into the granite 300-400 metres west of the current drilling area. These holes intersected broad anomalous gold mineralisation zones, which have a maximum thickness of 20 metres. The mineralisation was located within the granite grading from 0.1-0.5 grams per tonne associated with zones of minor quartz veining, biotite and albite alteration.

Of these five holes, best result was achieved from the hole – FKGRC100, as it intersected 3 metres at the rate of 1.29 gram per tonne from 96 metres close to the bottom of the hole. The company is required to carry out further drilling activities to identify the source of the auger anomaly, as the widths and gold grades returned from these first few holes were unable to provide explanation on the size and magnitude of the auger soil anomaly.

Below figure depicts the Kat Gap plan view, highlighting the current and previous classic RC drilling, in addition to significant gold intersections.

Source: Company’s Report

The company referred to the drilling results as encouraging, owing to considerable gold mineralisation zones located on the granite-greenstone contact, that are expected to boost any future open pit mining operation. Based on the results, high-grade gold mineralisation projects were found to be located in proximity to surface and continued to down-dip with increasing width. Meanwhile, CLZ CEO Dean Goodwin stated that the results were encouraging for the company, with plenty of anomalous gold below the oxide profile.

Future Drilling Plan

During the future drilling programs at its wholly owned Kat Gap project, Classic Minerals plans to focus on testing the main granite – greenstone contact further north and south along strike from the current drilling area, aimed at testing the northerly and southerly extensions for another 200-300 metres along strike. If successful, the testing would deliver 1,000 metres in total strike length. Additionally, through the reserve circulation drilling, the company intends to probe at depth down dip along the entire 400 metres of gold mineralised granite-greenstone contact that it has delineated as of now.

Moreover, aircore and RC drilling programs would be conducted out into the granite for testing the large 4.4 kilometres long geochemical anomaly that the company had identified in the historical auger soil sampling.

The company has planned to undertake follow up reverse circulation and few deep diamond holes to collate valuable structural data. It plans to start drilling during the mid of October 2019.

Stock Information  

Classic Minerals Limited has a market cap of AUD 8.71 million and approximately 4.35 billion outstanding shares. On 4 September 2019, the stock traded flat at a price of AUD 0.002.


Disclaimer

This website is a service of Kalkine Media Pty. Ltd. A.C.N. 629 651 672. The website has been prepared for informational purposes only and is not intended to be used as a complete source of information on any particular company. The above article is sponsored but NOT a solicitation or recommendation to buy, sell or hold the stock of the company (or companies) under discussion. We are neither licensed nor qualified to provide investment advice through this platform.

Join Our Discussion

Start discussion with value Investors for ASX Stock Market Investment and Opinion.


6 Cannabis Stocks under Investor’s Limelight…

Cannabis companies that sell both medicinal weed and recreational pot. Marijuana stocks to look at. Marijuana mergers and acquisitions. Dispensary data analytics. Upcoming marijuana IPO’s Those phrases have become increasingly common as marijuana legalization spreads.

Global spending on legal cannabis is expected to grow 230% to $32 billion in 2020 as compared to $9.5 in 2017, according to Arcview Market Research and BDS Analytics. As of June 29, 2018 the United States Marijuana Index, despite a lot of uncertainty around regulations, has over the past 1 year gained 71.49%, as compared to about 12% gain seen by the S&P 500.

Click here for your FREE Report